Home / Products / SMT Splice Tape / SMT 12mm Guide Splice Tape

SMT 12mm Guide Splice Tape

Our company mainly serves SMT and electronics manufacturing plants worldwide for many years.we can supply all kinds of SMT splice tape,SMT splice tool, SMT splice clips,
SMT Splice tape products description
1. The applicable to joint SMT carrier tape ,ensure non-stop to joint for all kinds of SMT carrier tape.
2. We mainly have four types splice tape: Single splice tape, Double splice tape, Omnipotent splice tape, Special splice tape, use for different SMT machines.
3. Easy operation, save labor, improve benefit of production, save cost.
4. High quality , high accuracy , good price
Remark ：
1，Main Color of products : Yellow ,Blue ,black (glossy black and matte black),Green , Silver 。
2，Different color are used to be induced by machine, it is easy to division and find。
3. The code of color as following big word: Yellow(Y),Blue(B),Black(D),Green(G), Silver (S).
4, the "X" stands for bevel shape of splice tape.

Quantity:
Availability:





Inquire Add to Basket

Model:
ST195D
Brand:
KERUI

Product Description

Anti-static SMT splice tape(ST195D)

1. Product structure: The overall design idea is to completely cover the surface of SMT material with holes at the refuelling place with tape, and effectively apply to the automatic programming implant of Panasonic's Proline-RoadRunner surface mount platform.

2. Feeding scheme: The product adopts edge positioning design, without any auxiliary tools when feeding, relying on positioning edge can be easily completed

3,Adopted the tape side to fix, there are tape for top and button and side of carrier tape,

so it is more fastness.

4.The SMT machine can confirm splice position on carrier tape by color sensor.

5,High quality , high accuracy , good price

6, Color : black, it is ESD splice tape, for panasonic.

7,the shelf life is about half year to a year, Storage condition: under about 10-30 degree.

8,Package:500pcs/bag for 8mm-16mm, 250pcs/bag for 24mm-44mm

ST195D-12MM

接料胶片展示1

How to use:

1. On the SMT component, cut along the center of the hole

2. Remove the covered base paper

3. Insert the raised round point of the film into the two joint holes, fold it in half along the center of the substrate, and position the other side of the adhesive tape. After pressing the adhesive tape on the film, clear the substrate and press the lower film again, and the component tape will be connected well.

ST195 show 5_

Note:

1. After pasting, press the film tightly with your fingers to strengthen and fix it, so as not to open it easily

2. Friends on the machine, please try to stick it well on the machine, don't stick half of it and then on the machine the next day. Hot weather will lead to some glue the next day,The tape falls off easily.