SMT ESD splice guide tape

SMT Anti-static splice tape(ST195D-8mm)

1. Product structure: The overall design idea is to completely cover the surface of SMT material with holes at the refuelling place with tape, and effectively apply to the automatic programming implant of Panasonic's Proline-RoadRunner surface mount platform.

2. Feeding scheme: The product adopts edge positioning design, without any auxiliary tools when feeding, relying on positioning edge can be easily completed

3,Adopted the tape side to fix, there are tape for top and button and side of carrier tape,

 so it is more fastness.

4.The SMT machine can confirm splice position on carrier tape by color sensor.

5,High quality , high accuracy , good price

6, Color : black, it is ESD splice tape, for panasonic.

7,the shelf life is about half year to a year, Storage condition: under about 10-30 degree.

8,Package:500pcs/bag for 8mm-16mm, 250pcs/bag for 24mm-44mm

How to use:

1. On the SMT component, cut along the center of the hole

2. Remove the covered base paper

3. Insert the raised round point of the film into the two joint holes, fold it in half along the center of the substrate, and position the other side of the adhesive tape. After pressing the adhesive tape on the film, clear the substrate and press the lower film again, and the component tape will be connected well.

Note:

1. After pasting, press the film tightly with your fingers to strengthen and fix it, so as not to open it easily

2. Friends on the machine, please try to stick it well on the machine, don't stick half of it and then on the machine the next day. Hot weather will lead to some glue the next day,The tape falls off easily.