Availability: | |
---|---|
Quantity: | |
ST182Y
KERUI
SMT double splice tape (ST182Y-16mm)
1,The applicable to joint SMT carrier tape ,ensure non-stop to joint for all kinds of SMT carrier tape.
2,Easy operation, save labor, improve benefit of production, save cost.
3,High quality , high accuracy , good price
4,Main Color of products : Yellow ,Blue ,black。
5, Sizes: 8mm, 12mm, 16mm, 24mm/32mm and so on.
6,Tape connectors guarantee perfect and reliable joints in 8mm SMD tapes
7, Joining without any tools or fixtures, with precise pitch spacing, with convenient pre-cut length
8,the shelf life is about half year to a year, Storage condition: under about 10-30 degree.
9,Package:500pcs/bag for 8mm-16mm, 250pcs/bag for 24mm-44mm
1 On the SMT element, cut along the center of the hole
2. Remove the covered base paper
3. Insert the raised round point of the film into the two joint holes, fold it in half along the center of the substrate, and position the other side of the adhesive tape. After pressing the adhesive tape on the film, clear the substrate and press the lower film again, and the component tape will be connected well.
Note:
1. After pasting, press the film tightly with your fingers to strengthen and fix it, so as not to open it easily
2. Friends on the machine, please try to stick it well on the machine, don't stick half of it and then on the machine the next day. Hot weather will lead to some glue the next day,The tape falls off easily.
SMT double splice tape (ST182Y-16mm)
1,The applicable to joint SMT carrier tape ,ensure non-stop to joint for all kinds of SMT carrier tape.
2,Easy operation, save labor, improve benefit of production, save cost.
3,High quality , high accuracy , good price
4,Main Color of products : Yellow ,Blue ,black。
5, Sizes: 8mm, 12mm, 16mm, 24mm/32mm and so on.
6,Tape connectors guarantee perfect and reliable joints in 8mm SMD tapes
7, Joining without any tools or fixtures, with precise pitch spacing, with convenient pre-cut length
8,the shelf life is about half year to a year, Storage condition: under about 10-30 degree.
9,Package:500pcs/bag for 8mm-16mm, 250pcs/bag for 24mm-44mm
1 On the SMT element, cut along the center of the hole
2. Remove the covered base paper
3. Insert the raised round point of the film into the two joint holes, fold it in half along the center of the substrate, and position the other side of the adhesive tape. After pressing the adhesive tape on the film, clear the substrate and press the lower film again, and the component tape will be connected well.
Note:
1. After pasting, press the film tightly with your fingers to strengthen and fix it, so as not to open it easily
2. Friends on the machine, please try to stick it well on the machine, don't stick half of it and then on the machine the next day. Hot weather will lead to some glue the next day,The tape falls off easily.