Order online or call us +86 13714691860
Email: bruce@keruismt.com
Home / Products / SMT Splice Tool / SMT Staper Splice Tool

SMT Staper Splice Tool

          We have two kinds of stapler type SMT splicer, one is used for edge splicer copper clip (ST381D), another is used for splice no side clip (ST381F), their function is same, these two kinds of splicer and anti-static (ST381I,ST381K) and non-anti-static. It is also possible to install the SMT splice station (ST381E).
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button
  • ST381D


                                                        SMT stapler splice tool

Usage of SMT stapler splice tool:

1, press hard to open the two handles of the pliers, so that the lower pressure plate and the bottom plate open, take a piece of copper buckle placed on the two bolts of the copper buckle, pay attention to the correct position of the copper buckle, 

2, the two disconnected material belt respectively take a end, respectively move the two card material bars parallel to the bottom plate, and then the disconnected material belt is aligned above the copper buckle, and then card the material belt.

 3, hold the two handles with your hand, and use even force to close the two handles until the lower pressure plate and the bottom plate are combined into a level, so that the copper buckle will jam the material belt. 

4, finally let the two handles open, unscrew the card bar, take out the connected material belt.

show 9

ST381D tool

1, the principle of stapler, convenient and fast;

2, can be quickly installed on the receiving table, saving time;

3, paper tape, material tape all compatible, good expansibility;

4, the copper plate is easy to install, greatly improve efficiency;

5. Fast and accurate feeding; use for side stapler clips;

6, Package: 1pcs/box


Contact us



Contact Us

:+86 13714691860
:R906/F9,Taihao Building, Zhushan road, Changjiang District, Jingdezhen City, Jiangxi Province P,R China(333000)

Follow us